Water damage and mold raise a lot of questions, and you deserve straight answers. Mountain Air Restoration is an IICRC Certified Firm, and everything below reflects the industry standards for water damage restoration (IICRC S500) and mold remediation (IICRC S520). Don’t see your question? Give us a call. We're happy to help.
As soon as possible. Mold can begin growing on wet building materials, carpet, and furniture within 24 to 48 hours, and clean water can become contaminated the longer it sits. The IICRC S500 water damage standard calls for a prompt response, and the sooner professional drying starts, the more of your home can usually be saved instead of torn out. Mountain Air Restoration provides 24/7 emergency water damage response across Central Oregon.
If it is safe to do so:
The IICRC S500 standard groups water by how contaminated it is, and the category determines what can be saved:
Water can get worse over time. A clean-water leak left for several days can become Category 2 or 3.
Most structural drying takes 3 to 5 days. Hardwood floors, plaster, concrete, cabinets, and water that has reached wall cavities or crawlspaces can take longer. Our technicians take moisture readings at every visit and record them in a drying log. Equipment is removed only when materials reach their drying goal, which is the normal moisture level of matching unaffected materials in your home.
Drying only works when it runs continuously. Turning equipment off lets moisture move back into materials, makes drying take longer, and raises the risk of mold. If noise or a tripped breaker becomes a problem, call us, and we'll adjust the setup. Expect a modest increase in your electric bill. Some insurance policies reimburse it.
We save materials whenever industry standards allow. Materials are removed when water is trapped behind them and can't be dried in place, when they've been touched by Category 3 water, or when they're swollen, delaminated, or already growing mold. Carpet pad is almost always replaced because it holds water like a sponge. A "flood cut," where drywall is removed 2 to 4 feet up from the floor, lets air reach the wall cavity so the structure dries faster.
In older homes, Oregon requires an asbestos survey before materials are disturbed in homes built before 2004, and lead-safe work practices apply in homes built before 1978. We handle both as part of the job.
Often yes, if it's clean water and it's caught quickly. The carpet can usually be dried and re-laid, though the pad is normally replaced. With sewage or flood water (Category 3), industry standards call for the carpet and pad to be removed and thrown away.
With clean-water losses, most families stay home while the drying equipment runs. We recommend staying out of the affected area and possibly relocating when there is sewage or floodwater, mold, or demolition dust, or when someone in the home is very young, elderly, pregnant, immunocompromised, or has respiratory problems.
It depends on your policy, and only your insurance company can confirm coverage. Sudden and accidental losses, like a burst pipe or appliance failure, are commonly covered. Long-term leaks, maintenance issues, and groundwater are commonly excluded, and outside flooding usually requires a separate flood policy. Mold coverage is often limited.
We document everything insurers expect, including photos, moisture readings, drying logs, and itemized estimates, and we work directly with your adjuster. You have the right to choose your own restoration contractor.
When appropriate, yes, especially with contaminated water. We use EPA-registered products according to their labels. Antimicrobials support the restoration process but are never a substitute for removing contamination, cleaning, and drying. Let us know about any chemical sensitivities.
It can be. Mold exposure can cause allergic reactions, irritation of the eyes, nose, throat, and skin, and asthma attacks. People who are more sensitive include infants and young children, older adults, pregnant women, people with asthma, allergies, or respiratory conditions, and anyone with a weakened immune system. If you have health concerns, please talk with your doctor. We can find out whether elevated mold is present in your home and remove it safely.
Common signs are visible growth, a musty or earthy smell, past or ongoing water damage, stained or peeling surfaces, and high indoor humidity or condensation on windows. Mold almost always comes from a moisture problem, so finding and fixing the moisture source is as important as removing the mold.
We follow the IICRC S520 mold remediation standard. The goal is to physically remove mold, not just kill it, because dead mold can still cause allergic reactions. A typical project includes:
For small areas, roughly 10 square feet or less, on hard surfaces, many homeowners can. Fix the moisture problem first. Wear an N95 respirator, gloves, and eye protection, and ventilate the area. Scrub the growth off with a stiff brush and a Borax paste (Borax mixed with water to a toothpaste-like consistency) or a detergent solution. Then wipe clean and let it dry completely. Bag and throw away moldy porous items like cardboard and ceiling tiles.
Call a professional if the area is larger than 10 square feet, the mold is inside walls, HVAC systems, attics, or crawlspaces, it came from sewage or flood water, it keeps coming back, or anyone in the home is sensitive to mold.
We don't recommend it, and neither do IICRC standards. Bleach can lighten stains on hard surfaces, but it doesn't reach mold growing into porous materials like wood and drywall. Because bleach is mostly water, it can soak in and help mold grow back. It also gives off harsh fumes and can create toxic gas when mixed with ammonia. And dead mold still contains allergens that have to be physically removed. The real fix is removing the mold and correcting the moisture problem.
No. Under the IICRC S520 standard, sprays, fogging, and sealant coatings aren't a substitute for removal. Coatings are applied only after surfaces have been properly cleaned, as an extra layer of protection.
Our cold high-desert winters create condensation. In attics, warm, moist air from the house, from bathroom fans venting into the attic, can lights, or gaps in the ceiling, meets cold roof sheathing and condenses or frosts. Blocked ventilation and roof leaks make it worse. In crawlspaces, the usual causes are a missing or damaged vapor barrier, poor drainage, irrigation or downspouts near the foundation, and plumbing leaks. Along with the remediation, we identify the cause and recommend how to correct it.
Usually not, because the work area is sealed off and kept under negative pressure. We may recommend avoiding the work area or relocating temporarily if someone in the home is especially sensitive or the project is large.
Yes. Attic mold remediation comes with a lifetime warranty that can be transferred to a new owner once, which is a real plus when you sell your home. Crawlspace mold remediation comes with a one-year mold-free warranty. Your contract has the full terms.
We recommend testing when someone in the home has symptoms or health concerns, when there's a musty odor but no visible mold, when you want to identify visible growth, when you're buying or selling a home, or after remediation to confirm the area is clean. Air samples and tape or surface samples are analyzed by an independent, accredited laboratory. Our Comprehensive Home Health Checkup (CHHC) combines a visual and moisture inspection, photo documentation, and lab results in one report.
The IICRC S520 standard calls for post-remediation verification to confirm the area has returned to normal conditions before containment is removed and rebuilding begins. If you or your lender prefer an independent indoor environmental professional, we're happy to coordinate with one.
Yes. Oregon requires an asbestos survey before renovating or demolishing materials in homes built before 2004. Homes built before 1978 may contain lead-based paint. Mountain Air Restoration is a licensed Oregon lead-based paint renovation contractor and follows EPA lead-safe work practices. We don't perform asbestos abatement, but we can refer you to a licensed abatement contractor.
Control moisture. Fix leaks promptly, keep gutters and downspouts directing water away from the foundation, aim sprinklers away from the house, keep crawlspace vapor barriers intact, make sure bath fans vent outdoors instead of into the attic, and keep indoor humidity below 50 percent. Periodic attic and crawlspace inspections catch problems early.
The IICRC (Institute of Inspection, Cleaning and Restoration Certification) is the nonprofit that sets the industry standards for water damage restoration (S500) and mold remediation (S520). Insurers and adjusters use these standards as the benchmark for proper work. As an IICRC Certified Firm, Mountain Air Restoration employs IICRC-certified technicians, carries the required insurance, and follows IICRC standards and its code of ethics.
We serve Central Oregon, including Bend, Redmond, Sisters, La Pine, Prineville, Madras, Sunriver, and Camp Sherman. Emergency water damage response is available 24/7.
We don't clean ducts or dryer vents ourselves, but we're happy to refer you to a trusted local duct cleaning company. If mold is found in an HVAC system, we coordinate that cleaning as part of the remediation plan.